Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Pentair Spectrum AquaLight

  1. Back To Top    #1

    Pentair Spectrum AquaLight

    i have pentair spectrum aqualight ,that doesnt wk properwith lighting .goes through its cycle but at the end of cycle it goes blank for 5 sec then comes on again for a cycle then at end it goes blank again ?????
    Play dress up games online and be on the fashion, all the time, the performance of your abilities as a young fashion designer!

  2. Back To Top    #2

    Join Date
    May 2007
    South Central NJ

    Re: Pentair Spectrum AquaLight

    Sounds like a dead bulb.

    Owner of - PoolGuyNJ LLC
    Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.

  3. Back To Top    #3

    Join Date
    May 2011
    Orange County, CA

    Re: Pentair Spectrum AquaLight

    Seems like odd behavior. Any water in the housing? Are the bulb wattages correct? This sounds like an overheating issue.
    38K in ground pool with attached spa. Current equipment: Easytouch 8 (521150) with IC-60 SWCG with web control by Autelis, 1x Pentair IntelliFlo 011018 pump (for filter), 1x Pentair 2HP WhisperFlo pump (for waterfall), 2X Pentair IntelliBrite 5G 12V lights, Pentair MiniMax400 NG Heater, Pentair SMBW2060 DE filter. Zodiac Barracuda MX8 cleaner on dedicated cleaner line. Lighting/home automation controlled by Insteon/ISY-99i.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts