Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Water level

  1. Back To Top    #1

    Join Date
    Mar 2009
    eastern washington state

    Water level

    I cant remember what the water level is to be at when closing with a loop lock cover.. I think its supposed to be about 6" below the skimmer is this right or wrong... Thanks for the help....
    live in eastern washington state
    18x36, Vinyl inground 24k
    Hayward 1 hp filter pump
    1 skimmer/2 returns
    24" sand filter, polaris 280 with booster pump.

  2. Back To Top    #2

    In the Industry
    X-PertPool's Avatar
    Join Date
    Jun 2009
    Exeter, PA

    Re: Water level

    Taken from

    Should I drain my pool before putting on my LOOP-LOC cover?
    No! It is very important to maintain proper water level to help support the weight of the cover and prevent excess wear. For LOOP-LOC mesh covers, water level should be 15" to 18" below the top of the pool. For ULTRA-LOC solid covers, water level should be 12" to 16" below the top of the pool. If proper water level is not maintained, the warranty can be void.
    X-Pert Pool Service
    X-Pert Pool on Facebook and @XPertPoolServic on Twitter
    22,000 gal / 16' x 32' / Vinyl / Hayward s244t /Pentair SuperFlo 1 hp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts