I received my TF Kit; fantastic kit!
My SWG and pumps have been running since the pool was installed towards the end of November. I hadn't tested till now because there was still debris in the pool and it took a while for the deck to be poured and the pool final vac.
Anyway, you can see the equip list in my sig. The SWG is set at 40% output and runs 8 hours per day. Today's water temp was 60 degrees F, and here are the numbers:
FC 14
CC 1
TC 15
Ph 7.7
T/A 140
CH 100
CYA 42
Salt 3155
I know the CYA is low for a SWG, and my unit calls for 4000 salt.
What changes would the experts recommend given it is cold water and no activity?
My SWG and pumps have been running since the pool was installed towards the end of November. I hadn't tested till now because there was still debris in the pool and it took a while for the deck to be poured and the pool final vac.
Anyway, you can see the equip list in my sig. The SWG is set at 40% output and runs 8 hours per day. Today's water temp was 60 degrees F, and here are the numbers:
FC 14
CC 1
TC 15
Ph 7.7
T/A 140
CH 100
CYA 42
Salt 3155
I know the CYA is low for a SWG, and my unit calls for 4000 salt.
What changes would the experts recommend given it is cold water and no activity?