My Pentair Whisperflo finally arrived today. Below is a picture of my current setup for reference.
1. Hacksaw or sawzall to cut PVC?
2. Pump is 2" and pipes are 1.5". I'm thinking a 1.5" x 2" adapter. Threaded on the 2' side and slip on the 1.5" side. Sound correct?
3. For materials, I assume teflon tape on all threads, and primer/glue on all slips. Which primer ang glue?
4. Plan to cut in middle of pipe as shown below with red line and insert a union. I'll replumb from there down to the pump, getting rid of the coupler. Does this make sense?
5. The run between the pump and diverter valveis very short. I'll have to replumb this as well.
Thanks for all the help. Any idea how long this should take?
1. Hacksaw or sawzall to cut PVC?
2. Pump is 2" and pipes are 1.5". I'm thinking a 1.5" x 2" adapter. Threaded on the 2' side and slip on the 1.5" side. Sound correct?
3. For materials, I assume teflon tape on all threads, and primer/glue on all slips. Which primer ang glue?
4. Plan to cut in middle of pipe as shown below with red line and insert a union. I'll replumb from there down to the pump, getting rid of the coupler. Does this make sense?
5. The run between the pump and diverter valveis very short. I'll have to replumb this as well.
Thanks for all the help. Any idea how long this should take?