This is a great board ! It is amazing how much information I found here.
I am having problems with my Pool Pilot system after returning from vacation. The pool was green and the control box showed 3 flashing lights.
Actions taken:
- Cleaned the cell (It was fairly dirty and after cleaning it looks like new)
- Cleaned the sensor (just in case the readings were off)
- Added shock, salt and acid in an attempt to restore to the chemical balance
After all this, there were still 3 flashing lights. Next step was to verify the control box:
- Doing the Diagnostics, it showed no voltage and minimal current
Verified the fuses and found the ceramic fuse to be faulty. Replaced the fuse.
The indicator lights now flash twice (at least a difference). The Diagnostics show active voltage and current.
Please advice. Is my circuit board broken?
I am having problems with my Pool Pilot system after returning from vacation. The pool was green and the control box showed 3 flashing lights.
Actions taken:
- Cleaned the cell (It was fairly dirty and after cleaning it looks like new)
- Cleaned the sensor (just in case the readings were off)
- Added shock, salt and acid in an attempt to restore to the chemical balance
After all this, there were still 3 flashing lights. Next step was to verify the control box:
- Doing the Diagnostics, it showed no voltage and minimal current
Verified the fuses and found the ceramic fuse to be faulty. Replaced the fuse.
The indicator lights now flash twice (at least a difference). The Diagnostics show active voltage and current.
Please advice. Is my circuit board broken?