What does everyone use for a backwash hose on the Intex 2650 Sand Filter? I'm using a intex hose that is usually used to connect to the return and it's just not long enough. I need something closer to 15-20 feet long. Suggestions?
Making an Intex-to-1 1/2" PVC Converter is pretty easy. You'll need:Richrd42 said:...will the "hose adapter" fit and/or screw onto the outlet part of the pump?
I'm going to be purchasing the above pump in the near future, and want to be sure I'm able to back flush the pump and/or vacuum to waste without encountering any hose connection issues.
I imagine the 29' from Intex will work just fine. I went the converter route to minimize clamps, have lots of hose options for backwash and b/c I like to huff PVC cement.Richrd42 said:I'm wanting to know where I can get a long hose to screw onto it when I back-flush and/or vacuum to waste. Intex sells a 29' hose...
No problem. You do have the rubber grommet between the adapter and filter/pump, right? If so, it's Either too much space or not enough cement. I use the blue Oatey PVC cement made for pool plumbing liberally. Also, after I seat the adapter, I turn the collar for about 30 seconds so it doesn't get glued in place. I may have an extra converter if you don't have any more collars on hand. Lemme know.wwhite0310 said:Thank you for showing those pictures. I think I now know why mine is leaking. I have too much space between the adapter and collar it looks like.