Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Intek SWG and timer?

  1. Back To Top    #1

    Join Date
    Jul 2011

    Intek SWG and timer?

    I'm looking at installing a 15x30x54 AGP. I have an older Intek SWG that will beep if there is no water flow when it's running and will not work if it loses power forcing me to reset the timer.
    If I use this on a new AGP can I use a timer on the pump or should I get a 2 speed pump and let it run 24x7? Other option is selling it and getting a different SWG but I'd prefer to use what I have.

    Sharkline Matrix 15x30x54, Hayward 1hp 2 speed pump, Hayward EC-50 DE Filter, Rome/Solarium 105k Heat Pump, Aquabot Rover Jr - Deceased - looking to replace it

  2. Back To Top    #2
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    SouthWest Alabama

    Re: Intek SWG and timer?

    A 2-speed pump is your best avenue. Get as small of one as you can.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts