Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Help setting Tork Timer

  1. Back To Top    #1

    Help setting Tork Timer


    I just moved in to a house that has a pool and the previous resident left me little instruction on what to do. First question is how do I set the timer? It seems like it would be obvious. Set the pins to start and stop time BUT there are 4 pins Next when I flip the switch on the timer to on or off it seems to do nothing but I know the timer works somehow since the filter runs during the day. I went to a Tork identifier site and I think it is a Tork 1100 series. Below is a pic. Any help would be much appreciated.

    Learning to Manage
    10.5K Alpine Blue Pebble Sheen with a dash of abalone
    Hayward AquaRite, ProGrid 4820 DE, SP II

  2. Back To Top    #2
    Ohm_Boy's Avatar
    Join Date
    May 2007
    Orlando, FL

    Re: Help setting Tork Timer

    I'm no authority on those, but it looks like it's set up to run two separate cycles in a day. like 7:00 - 11:00 AM and 5:30 - 9:30 at night. You should be able to just turn the dial to line the current time with the "TIME" marker at the bottom right - roughly where 10:00 PM is in that pic.
    [center:1kpalu48]Helpful Links: Pool School | CYA/Chlorine Chart | Pool Calculator[/center:1kpalu48]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts