threaded directional nozzles, mine are missing

[*ryan]

pool came with the house
got the swg up and running
and am getting very close to getting all my numbers right

anyways
i do not have any jet nozzles on my outputs into the pool
it just goes from the 1.5" pipe into the pool
it is threaded like nozzles should be there

but it does not feel like there is a great amount of water pressure coming out
and i think maybe some water directioning owards the skimmer would be benificial

is there any particular size i should be looking for as per the output hole?
i see 3/8"
1/2"
3/4"
1"

anyone better then another?
any reason to get them? any reason to stay without them?

thank you

 

[duraleigh]

and i think maybe some water directioning owards the skimmer would be benificial

Yeah, they help direct the circulation of your pool. You definitely need them. I would start with 3/4 inch. Note your psi before you put them on and then after. The smaller "eyeball" you use, the higher your psi will be. There is no "correct psi but you should probably be at least 10 and not much more than 20.

 

[*ryan]

the pump shows about 12 psi

i will get some eyeball 3/4" ones
thank you

 

[*ryan]

well finally got around to measureing to double check

having a brain fart
i think i can talk my way threw it, but want to be sure

i measured the threaded output and it is about 2"

so is it a 1.5" threaded output i need
as the threaded adapter glues over the 1.5" pipe it will be larger
which could net me 2" at the threads

correct?

 

[Bama Rambler]

Correct! 1½".
How many returns do you have. If it's two or less I'd go with 1" eyeballs. Just my personal choice.

 

[*ryan]

i have 2 of them