OK, well in your case (as opposed to what I replied in another thread yesterday) you will not want to clean the filter for a while or you'll loose the CYA that hasn't dissolved yet. The granules don't dissolve very well or fast when you add CYA this way, so leave the pump running full time so the CYA can dissolve completely.
In the future, put the CYA into a sock, rubber band the top and tie off to the ladder or in front of the return. Then you can squish it frequently till it's all gone, it will dissolve nicely (quickly) this way.
You can test for everything except CYA within about a half hour or so after adding chemicals. CYA may not register on a test for a week so don't bother with that yet. You know what you added, go ahead and use that number for now. Dose your pool w/chlorine (now, and till you start the SWG) according to the ppm level of CYA that you know you added. Use the standard minimum/target/shock numbers from the calculator until your SWG is fully operational.
How much did you add btw? What ppm were you aiming for?
In the future, put the CYA into a sock, rubber band the top and tie off to the ladder or in front of the return. Then you can squish it frequently till it's all gone, it will dissolve nicely (quickly) this way.
You can test for everything except CYA within about a half hour or so after adding chemicals. CYA may not register on a test for a week so don't bother with that yet. You know what you added, go ahead and use that number for now. Dose your pool w/chlorine (now, and till you start the SWG) according to the ppm level of CYA that you know you added. Use the standard minimum/target/shock numbers from the calculator until your SWG is fully operational.
How much did you add btw? What ppm were you aiming for?