Hi, last fall I took my friend's AGP. Since he had a bunch of Pristine Blue chemicals left, I decided to use them until I closed it for the winter. Over the winter I stumbled across this site and I decided that I would switch to chlorine (bleach) this year. I have done a bunch of reading in the forums and pool school, but before I dump 17 boxes of borax and 5 gallons of muriatic acid into the pool, I want to make sure I'm good to go. I don't want to find out I have to drain it later. My water is crystal clear and has been since I opened the pool. Below are my test results. Today I had the pool store test for copper and there was none.
TF100 Test Results - 6/21
FC: 3.5
CC: 0.5
TC: 4.0
pH: 7.6
TA: 120
CH: 110
CYA: 30
Temp: 77
Pool Store Test Results - 6/22
FC: 3.2
CC: 0.8
TC: 4.0
pH: 7.6
TA: 126
CH: 125
CYA: 66
Copper: 0
Temp: 75
Thanks for the help.
TF100 Test Results - 6/21
FC: 3.5
CC: 0.5
TC: 4.0
pH: 7.6
TA: 120
CH: 110
CYA: 30
Temp: 77
Pool Store Test Results - 6/22
FC: 3.2
CC: 0.8
TC: 4.0
pH: 7.6
TA: 126
CH: 125
CYA: 66
Copper: 0
Temp: 75
Thanks for the help.