Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: HELP!!!

  1. Back To Top    #1


    We purchased an Intex 24'x52" Ultra-Frame pool last year. This is the 4th one we have had over time and until this one, not one issue. However, upon setting up this HUGE pool and filling it, we discovered a tear near a seam.The tear is about 3 1/2", now . We purchased an Intex patch kit, but I am terrified it won't hold because of where it is. Does anyone know if you can put a drop-in liner into an existing pool like these? The Intex replacament liner is $450, but I can purchase a drop-in for about $150.
    Pool: 10k gal, sand, AG
    Taylor K-2006 Test Kit


  2. Back To Top    #2
    Mod Squad zea3's Avatar
    Join Date
    Jul 2009
    Houston, Texas

    Re: HELP!!!

    The trick would be holding the liner in place. If you can figure out how to secure the liner without tearing it may work. Is this the 1st time you have set it up? Try contacting Intex customer service and maybe they can do something for you.
    TFP Moderator
    Helpful links: TF Test Kits,TFP Pool School, PoolMath
    Vogue 21' round AG, Pentair 1 hp 2 speed pump, 36 sq ft DE filter, Hayward S180T 150# sand filter, Houston, Texas
    Love TFP? Become a
    TFP Supporter!

  3. Back To Top    #3

    Re: HELP!!!

    No, we set it up last year with no trouble at all. Intex Customer Service has been useless. They were rude and acted as if I stood there with a knife and cut it or something. The ONLY thing they would say was that it had a 1 year warranty. I didn't purchase it through them and didn't have any kind of extension on it so basically it was my problem.
    Pool: 10k gal, sand, AG
    Taylor K-2006 Test Kit


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts