FC high and climbing

BigJD

0
Jun 6, 2008
176
Folks,

I am running my pump on high 24/7 right now for aeration (reducing TA for borates). My TA has hit my target value of 70 :party: and I have demonstrated the ability to raise PH by 0.5 in 24 hours with my homemade aerator. Here is my problem, I have a SWCG and it is cranking out chlorine! Latest test results:

TC: 13 (was 11.5, SWCG set to 45%)
CC: 0
PH: 7.0 (added MA tonight)
TA: 70
CH: 20
CYA: 40
Salt: 3500 panel

There has been no bather load whatsoever and the pool is clean. Should I simply shut off my SWCG for the time being? If so, how?

TIA
 
Okay ... I think I just had a duh moment .... reduced cell to 15% for tonight. I will recheck in the AM. No swimmers, no sun, and it has been cold ... all equals no FC usage ...
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.