I have been testing my water at least every 2 days. Today's reading;
FC 1.0 ppm
CC 1.0 ppm
pH 7.9 ppm
TA 70 ppm
CH 270 ppm
According to the pool calculator I need to add 96 oz of Bleach to raise the FC & CC and 14 oz of Muriatic Acid to bring down the pH.
My question is how long should you wait before adding MA after adding the Bleach? With a SWG I understand it's OK to leave the cell on when adding bleach but I have read that it is recommended to turn off the cell when adding MA. If I do, then for how long?
I'm slowing trying to process all this information. I have been keeping a log since day of getting my K-2006 test kit.
FC 1.0 ppm
CC 1.0 ppm
pH 7.9 ppm
TA 70 ppm
CH 270 ppm
According to the pool calculator I need to add 96 oz of Bleach to raise the FC & CC and 14 oz of Muriatic Acid to bring down the pH.
My question is how long should you wait before adding MA after adding the Bleach? With a SWG I understand it's OK to leave the cell on when adding bleach but I have read that it is recommended to turn off the cell when adding MA. If I do, then for how long?
I'm slowing trying to process all this information. I have been keeping a log since day of getting my K-2006 test kit.