My SWG normally has the salt level on the display, but two weeks ago it said "Cold"....
My chlorine has been off (low) and I had to add bleach to the pool...
I cleaned the cell with acid and rinsed it well and put it back in place, but it doesn't read the salt level..
I checked the manual and troubleshooting guide and it said if salt is too high, it won't display the salt level, so i emptied and exchanged 20% of the water and it took the salt level from 3700 to 3300 and it still isn't showing salt level..
The "salt too high" light never came on... I can't get it out of diagnostic mode even after unplugging it, etc..
I tested to water today and here are my stats:
pH 7.5, FC 12, CC 1, TA 80, CH 240, CYA 50, Temp 86....
Help???
My chlorine has been off (low) and I had to add bleach to the pool...
I cleaned the cell with acid and rinsed it well and put it back in place, but it doesn't read the salt level..
I checked the manual and troubleshooting guide and it said if salt is too high, it won't display the salt level, so i emptied and exchanged 20% of the water and it took the salt level from 3700 to 3300 and it still isn't showing salt level..
The "salt too high" light never came on... I can't get it out of diagnostic mode even after unplugging it, etc..
I tested to water today and here are my stats:
pH 7.5, FC 12, CC 1, TA 80, CH 240, CYA 50, Temp 86....
Help???