Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Coverstar cover off track

  1. Back To Top    #1

    Coverstar cover off track

    Please help!
    I have a Coverstar cover that is installed under the rim of the pool (e.g. about 3 inches below the concrete). Somehow, one side of my pool cover has come out of the track. There is about one foot at the lead edge that is still in the track. (I don't know the proper terminology, but it's like when a zipper is still attached to your pants, but once you pull it up, it didn't close anything!!!) I have managed to pump all of the water off that raced onto the cover, however, I'm now unsure as to how get the cover back into the track.

    Any help would be appreciated.
    16x32, vinyl liner, sand filter, salt, 22,000gal. GA

  2. Back To Top    #2

    In the Industry

    Join Date
    Mar 2011

    Re: Coverstar cover off track

    You have to force it open, pull off the guide blocks at the end of the tracks, put the cover "bead" back into the track, and re-install the guide blocks, then close it,.
    20X40 30,000 gallon gunite pool

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts