I've finally gotten my SWG running. I've got my pool cover off and I'm getting the following:
FCL 8.5
CC 0.5
ALY 70
CH 220
CYA 52
pH 7.5
Temp - approximately 70 deg F.
I run my pump 24 hours a day and my Intellichlor is set at 20% (lowest setting). I've got my pool cover off in an attempt to burn off some of the chlorine. I don't like to stop my pump since I'm about 2' higher than water level and don't want to be absent when the pump is struggling to prime. I've run the pump 24 hours/day since we had water in it in November last year.
1. Is there any way I can get the Chlorine down to 3-5 without doing some plumbing work.
2. My SWG is on yellow - LOW salt even though I've tested salt at 3720-4200 throughout the past week. I cleaned out the SWG once with a hose and nothing appears to be on the fins anywhere. I turned off the power supply and the electrical box with no success. Any suggestions?
FCL 8.5
CC 0.5
ALY 70
CH 220
CYA 52
pH 7.5
Temp - approximately 70 deg F.
I run my pump 24 hours a day and my Intellichlor is set at 20% (lowest setting). I've got my pool cover off in an attempt to burn off some of the chlorine. I don't like to stop my pump since I'm about 2' higher than water level and don't want to be absent when the pump is struggling to prime. I've run the pump 24 hours/day since we had water in it in November last year.
1. Is there any way I can get the Chlorine down to 3-5 without doing some plumbing work.
2. My SWG is on yellow - LOW salt even though I've tested salt at 3720-4200 throughout the past week. I cleaned out the SWG once with a hose and nothing appears to be on the fins anywhere. I turned off the power supply and the electrical box with no success. Any suggestions?