Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Dolphin Stick on Polaris Uni-Cover

  1. Back To Top    #1

    Join Date
    May 2007

    Dolphin Stick on Polaris Uni-Cover

    When my in-ground liner pool was build 8-9 years ago the two round Hayward drains in the deep end had the old style covers that had no slope to them. My Dolpin Dynamic would get hung up on one of the drains so installed the Polaris Unicovers and it prevented it from get stuck anymore. Last year the Polaris unicovers needed to be replaced (Rotted) but since there was a new style Hayward cover with a slope I replaced the drain covers. The dolphin got stuck on the new sloped covers so I went ahead and purchased new Polaris Unicovers but now I have a new problem. The Polaris Unicovers slide off the sloped drain covers and like a idiot I tossed the old style covers without the slope that retained the Unicovers ! Any ideas on what I can do ?

    My thoughts:
    1. Find some of the old style (Non-Sloped) drain covers. I looked everywhere to no avail.
    2. Find a cover like the Unicover that fits the sloped drain covers.
    3. Put one screw threw the unicover into the drain cover. I like to remove the Uncover occasonally to clean under it so this would prevent this from happening.
    20*40 Liner 2'-8' deep, Spill Over SPA, Electric Cover, Jandy Purelink (Aquapure & PDA), Hayward SP2610x15 (1.5HP Single Speed), Hayward H300 (Millavolt)

  2. Back To Top    #2
    Melt In The Sun's Avatar
    Join Date
    Oct 2009
    Tucson, AZ

    Re: Dolphin Stick on Polaris Uni-Cover

    11,200 gal, Pebble-Tec; Tristar 2-speed 1hp - Swimclear 325 ft2 cart - SWG - A & A in-floor cleaner - Heat pump. For the poolside cooking, a Yoder Wichita and a Big Steel Keg!
    TF Test Kits -- PoolMath -- Pool School
    Make each day your masterpiece. - John Wooden

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts