Received my new LQ today ... install took at the most 35 minuets counting the unboxing and direction reading. No leaks on any of the lines and i have enough pressure from my pump to max the flow meter out. I have a chemical levels baseline to start with and have adjusted my flow to be in between one and two on the meter since the pool water is still 60 degrees and not being used yet. Once the weather warms up i figure i can adjust for more flow as needed. i decided not to use one of the inline check valves as my LQ and pump is above water level and i was holding a prime when the pump was shut off. Again thanks to everyone for the help and advise with the LQ.
