I have a 2hp 3450rpm motor running my pump currently. I bought a rebuilt motor 5 years ago to do an apples for apples swap when my last motor died. Im guessing the pump will be my next big purchase so I thought I would start thinking about the situation.
Goals: cut electrical costs and decrease noise (current pump/motor is very loud.
In addition to info in my signature, here is my current setup.
Incoming:
2" plumbing from what I can see coming in from pool and spa. 1.5" Plumbing for hayward vac, dedicated plumbing.
Outgoing:
Spa - overflows into pool via 4 jets.
Aerator- never used
Waterfall -
Pool Seat Jets - hardly used
Pool Returns Jets - 4 eyeballs
Currently I run the filter from midnight till 5am. Summer usually a couple hours longer.
Paying $.08845 per kwh on peak.
Paying $.04363 per kwh off peak.
Any thoughts would be appreciated!
Goals: cut electrical costs and decrease noise (current pump/motor is very loud.
In addition to info in my signature, here is my current setup.
Incoming:
2" plumbing from what I can see coming in from pool and spa. 1.5" Plumbing for hayward vac, dedicated plumbing.
Outgoing:
Spa - overflows into pool via 4 jets.
Aerator- never used
Waterfall -
Pool Seat Jets - hardly used
Pool Returns Jets - 4 eyeballs
Currently I run the filter from midnight till 5am. Summer usually a couple hours longer.
Paying $.08845 per kwh on peak.
Paying $.04363 per kwh off peak.
Any thoughts would be appreciated!