Could anyone tell me what the correct voltage should be out of the control box for this salt cell? The control box is very old (its an old Chloromatic one also) so I checked the output voltage and its only about 0.8volts when turned right up (I was measuring DC volts).
I had assumed that the salt cell was the problem (also a bit old), but 0.8V doesn't seem enough, which could explain why it isn't producing chlorine. The gauge shows very little current flowing.
Thanks & regards
Andrew
I had assumed that the salt cell was the problem (also a bit old), but 0.8V doesn't seem enough, which could explain why it isn't producing chlorine. The gauge shows very little current flowing.
Thanks & regards
Andrew