Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 5 of 5

Thread: Replacement for my temperature controller

  1. Back To Top    #1

    Replacement for my temperature controller

    Hello,

    I have a large indoor pool with two separate pump/heater rooms. On one of the systems the temperature controller stopped working -- the LCD readout jumps all over the place and the unit doesn't perform properly. I can confirm this is the problem by swapping the controllers between systems.

    I am trying to find a replacement for the temperature controller but it is OLD and obsolete. I contacted the company and they were able to provide a manual, but had no other information.

    Can anyone recommend a (hopefully) drop-in replacement for this? I am including the manual they provided as well as the information on the unit itself.

    Edit: The file was too large to upload to the forum, so I uploaded it to my website: http://www.esorensen.com/930%20Series.PDF

    United Electric D932.
    Type Designation: D932X012
    Options: SET RANGE 0 TO 110F
    Probe: RTD-199.9 to 199.9F
    Line Voltage: 230VAC ONLY
    Output mode 1: 2.5AMPS@230VAC
    Output mode 2: 1.5AMPS@230VAC

  2. Back To Top    #2

    Join Date
    May 2007
    Location
    South Central NJ
    Posts
    3,192

    Re: Replacement for my temperature controller

    What is the controller connected to?

    Scott
    Owner of - PoolGuyNJ LLC
    Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.

  3. Back To Top    #3

    Join Date
    Oct 2010
    Location
    Georgia
    Posts
    317

    Re: Replacement for my temperature controller

    Ravix

    Call this company on Monday.
    http://www.instrumart.com/ProductList.a ... 7QodEBQPow

    They should be able to match your controller with a current production product at a reasonable price.
    poolschoolgrad

    20x40 free-form IG vinyl, 1hp Hayward superpump, Hayward pro grid DE filter, Raypak heatpump, Goldline Aquarite SWCG, Polaris 280 with booster, and tested using a Taylor K2006.

  4. Back To Top    #4

    Re: Replacement for my temperature controller

    Thanks for the suggestions. I missed them today (I'm on the West coast) but I'll call them tomorrow and let everyone know what I end up with.

  5. Back To Top    #5

    Join Date
    Oct 2010
    Location
    Georgia
    Posts
    317

    Re: Replacement for my temperature controller

    Another excellent source is Omega Engineering in Stamford, Conn.
    http://www.omega.com/toc_asp/subsection ... P01&flag=1

    They offer on-line chat support. Send them an e-mail with all the information you posted and they will make recommendations.
    Omega will send you FREE handbooks for various types of Industrial and process control.
    http://www.omega.com/literature/
    poolschoolgrad

    20x40 free-form IG vinyl, 1hp Hayward superpump, Hayward pro grid DE filter, Raypak heatpump, Goldline Aquarite SWCG, Polaris 280 with booster, and tested using a Taylor K2006.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •