Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Jandy One Touch and PDA

  1. Back To Top    #1

    Jandy One Touch and PDA

    I currently have a Jandy RS8 controlling my pool equipment. The outside panel is controlled from a wireless One Touch inside the house. The One Touch seems to be on the blink. Does anybody know whether I can replace the One Touch with a Jandy pda? Is it a straight swap or do I need a different wireless receiver at the outside panel?

    Thanks in advance.
    In ground Plaster pool 33,000 gal, DE filter, 2.5 HP pump, spa
    TF100 test kit
    Lucas, TX

  2. Back To Top    #2

    Join Date
    May 2007
    Location
    South Central NJ
    Posts
    3,192

    Re: Jandy One Touch and PDA

    As I recall, it's a different antennae. Additionally, you need to check the F/W level for the main controller. It might require a f/w upgrade. Older units may require a board swap.

    Scott
    Owner of - PoolGuyNJ LLC
    Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.

  3. Back To Top    #3

    Re: Jandy One Touch and PDA

    Thanks Scott. I also contacted Jandy:

    "Mike,

    The best option would be to replace the PCB with screen. The part number for the PCB is R0550800. The PDA won't be able to program if used with an RS system and the antenna would also need to be changed. Hope this helps!

    Regards,"

    Just in case somebody else was interested. Replacement LCD screen +/-$700. That's crazy!
    In ground Plaster pool 33,000 gal, DE filter, 2.5 HP pump, spa
    TF100 test kit
    Lucas, TX

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •