Hi all,
I'm considering uninstalling my waterfall pump for the winter, to save the electricity when it runs below freezing. I know I'll have to blow out the above ground lines, but I'm wondering if there are "plugs" which can be screwed into the open ends of my piping (the ends that normally connected to my pump). The pump is a Jandy 1.5 hp Stealth pump. Worse case, I could cover the ends with plastic bags or something similar, but a plug would be better (and I could drill/mount a bike tire valve in one, to aid in blowing out the lines).
Mike
I'm considering uninstalling my waterfall pump for the winter, to save the electricity when it runs below freezing. I know I'll have to blow out the above ground lines, but I'm wondering if there are "plugs" which can be screwed into the open ends of my piping (the ends that normally connected to my pump). The pump is a Jandy 1.5 hp Stealth pump. Worse case, I could cover the ends with plastic bags or something similar, but a plug would be better (and I could drill/mount a bike tire valve in one, to aid in blowing out the lines).
Mike