I can access manually RPM control and set it to any speed, ie. 50 rpm to over 3500 rpm.
currently running 24 hours/day at 799 rpm which is 99 watts or about 2.3-2.4 kW/day
however, no matter what speed I set rpm, the GPM is always showing 15.
I believe that is incorrect as at about 1085 rpm, 140 watts, the IntelliChlor Flow LED changes to Green (=Good), any speed below 1000 rpm starts flickering Red (=too slow, unit Off) but the Flow still shows 15 GPM.
In the manual mode, it appears only RPM can be controlled and watts adjust accordingly.
currently running 24 hours/day at 799 rpm which is 99 watts or about 2.3-2.4 kW/day
however, no matter what speed I set rpm, the GPM is always showing 15.
I believe that is incorrect as at about 1085 rpm, 140 watts, the IntelliChlor Flow LED changes to Green (=Good), any speed below 1000 rpm starts flickering Red (=too slow, unit Off) but the Flow still shows 15 GPM.
In the manual mode, it appears only RPM can be controlled and watts adjust accordingly.