have read the full 9 mb Pentair IntelliFlow VF manual.
have only 1 schedule set, from 00:00 to 23:59, pump on 24 hr/day.
system is set for 1 turnover.
when system is running a schedule, pressing up/down arrow shows watts, rpm and one display is Filter percent, ie. Filter 24% or Filter 15%
there is no explanation for this in the manual.
flow rate is 15 GPM, watts normally 122-130w, RPM normally 800-1000rpm, filter pressure is so low, the needle remains at below 1 psi.
have only 1 schedule set, from 00:00 to 23:59, pump on 24 hr/day.
system is set for 1 turnover.
when system is running a schedule, pressing up/down arrow shows watts, rpm and one display is Filter percent, ie. Filter 24% or Filter 15%
there is no explanation for this in the manual.
flow rate is 15 GPM, watts normally 122-130w, RPM normally 800-1000rpm, filter pressure is so low, the needle remains at below 1 psi.