I have a new SWG and have been running it for only 1 week. I haven't taken any pictures but the electrodes are completely coated with calcium scale (probably greater that 1/16th of an inch). Unfortunately there are no pool stores to get test results and the only available pool test kits are a HTH 4-way test kit and a strip test for CYA. Next time someone visits us this way I hope to get a proper test kit, but in the meantime this is all I have.
PH - 7.6
FC - 1.5
TA - 100
CH - no way to test
Salt - Aprox 6000 PPM based on salt added (no way to test here)
According to the manufacturer of my SWG I should clean my electrodes so I did that today. But I dont want to do that weekly.
Any ideas? Thanks again for all the help..
Danny
PH - 7.6
FC - 1.5
TA - 100
CH - no way to test
Salt - Aprox 6000 PPM based on salt added (no way to test here)
According to the manufacturer of my SWG I should clean my electrodes so I did that today. But I dont want to do that weekly.
Any ideas? Thanks again for all the help..
Danny