Hayward P4 Aqua Logic - Landscape Lighting?

[PJStyles]

I'm currently having a new in ground pool installed and was wondering if the aqua logic system allows one to connect landscaping lighting wire to then have lighting around the backyard and controlled by the aqua logic system? If so, what do I need in addition to the system itself and the wiring?

Previously, I had the lighting connected to a small transformer box that provided 600 watts of power and it was easy for me to calculate how many lights I could have based on the power supplied by that transformer box. However, with the aqua logic system, I don't know if I can even do this nor how many lights I could connect to it.

Any feedback or suggestions would be appreciated. Thanks

 

[PoolGuyNJ]

Connect the transformer to a free relay. People do it all the time.

Scott

 

[PJStyles]

Only problem is I have no electrical outlet on that side of the house to plug the transformer in... or would I no longer need to plug it in if I connect it to the free relay?

 

[PoolGuyNJ]

The relay will need power from a breaker. The relay may transfer power to a GFCI outlet or directly to the lighting transformer if a GFCI breaker is used.

Scott