I have a new plaster pool. It's been full about 3 weeks. It is 24,300 gallons and has a SWG.
My question is about the differing chemical recommendations I am running into.
ProLogic Controller Instructions: Pentair Test Kit TFP
FC 1-3 FC 1-3 FC 3-5
TA 80-120 TA 80-120 TA 60-80
CYA 60-80 CYA 30-50 CYA 70-80
CH 200-400 CH 200-400 CH 250-350
Most everything is close except TFP recommends higher FC and lower TA. There are 3 different levels for CYA. The Pentair kit (came with the pool - waiting on my TFP kit) instruction booklet says FC should be 1-3, but the test block says ideal is 1-1.5.
Right now I have crystal clear water and no problems. I do have to add acid fairly frequently to keep TA and PH down. I would just like to know what levels I should be shooting for.
Thanks
My question is about the differing chemical recommendations I am running into.
ProLogic Controller Instructions: Pentair Test Kit TFP
FC 1-3 FC 1-3 FC 3-5
TA 80-120 TA 80-120 TA 60-80
CYA 60-80 CYA 30-50 CYA 70-80
CH 200-400 CH 200-400 CH 250-350
Most everything is close except TFP recommends higher FC and lower TA. There are 3 different levels for CYA. The Pentair kit (came with the pool - waiting on my TFP kit) instruction booklet says FC should be 1-3, but the test block says ideal is 1-1.5.
Right now I have crystal clear water and no problems. I do have to add acid fairly frequently to keep TA and PH down. I would just like to know what levels I should be shooting for.
Thanks