Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Taylor K-2006 Procedure for testing pool

  1. Back To Top    #1

    Taylor K-2006 Procedure for testing pool


    So I can get ahead of the instructions that come to me, when I receive my Taylor K-2006 kit later this week. Can someone reference to me the best place to see how to test on a step by step basis for this particular testing kit?

    11K gal | Plaster | Starclear II Cartridge | Speck IV 2hp | Polaris 380

  2. Back To Top    #2

    Join Date
    Aug 2008
    Rochester, NY

    Re: Taylor K-2006 Procedure for testing pool

    20000 gal IG freeform, vinyl, Pentair Sand Dollar filter, Pentair 2 speed pump, Pentair Intellitouch controller, Pentair Heat Pump. Built 2008

  3. Back To Top    #3
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    SouthWest Alabama

    Re: Taylor K-2006 Procedure for testing pool

    That's excellent advice specifically for the kit but there's a sticky at the top of this section that is applicable to the tests contained in the K-2006.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts