This morning I put in my CircuPool RJ45 and fired it up. It is reporting low salt since the first salinity test. The readout showed <2500ppm at first, which according to the manual is normal, but after a few cycles through the salinity test it is reporting salt as 2600ppm. The water was tested with a Taylor salt test kit Thursday night as 1400ppm. I added 300lbs of blue solar salt, and it was all visibly dissolved by Friday morning. A salt test on Friday evening reported 3600ppm salt. I tested again this morning (Saturday) and got 3200ppm salt. Still higher than the RJ45 is reading. Do I just need to wait for things to settle in, or is there a problem?