I have a few questions about My new Suntouch Controller.
This is a complete new Pentair System, Liner, Pump, Filter, Solar Panels, IC40 and Suntouch Controller running in Pool/Spa (single body of water) Mode. the pump is set up as a single speed Pump.
I have several things that don't match the manual on my Controller such as:
1. the Display reads "LOW" where the manual states that it should read "POOL".
2. There is no "pool" option listed in the list for selecting this. The list has "hi" and "low" for the Pool Cir. Pump. (HI/LOW Pump speed perhaps?)
3. on the Solar Menu there are is a option for cooling with the Start/stop temp. settings. Nothing in the manual for this either.
I recall reading a post here that the Pentair System is NOT real user friendly and the referance to "Circuit" is misleading in the manual.
This Looks to me to be New Features for display of the two speed pump status and Night cooling program, added after the Manual information.
This system appears to be working nicly except that the IC40 wants to run at Super Chlor.. mode. I currently have it at 0% and 0 run time as I am drawing down the C after shocking yesterday.
anybody know if this is the case?