Polaris 280 having power issues

[CarrolltonTXPool]

New booster pump as of 2 months ago so i don't think that's it. The tail whips around, it will roll slowly across the bottom, but it cannot climb walls. I put all new bearings, wheels and tires on a year ago almost to the day.

What is the first thing to check when this happens? The filter screen is clear.

 

[Mr. Ed]

The wheels may not quite be catching the drive shaft as they should or may be worn. The wheels may need a simple adjustment. They can be adjusted by removing the top, locating and loosening the two screws on each axle, and moving them so that the wheels are properly catching the drive axle. Also check that the teeth inside the drive wheels are not worn. I know several pool stores in your area (including mine) offer free in store labor. Definitely take advantage of the free look over these stores offer!

Hope this helps!

 

[CarrolltonTXPool]

ok thanks! I'll try to check it out tonight.

 

[PaulR]

Make sure all the internal hoses are on tightly. That's usually the problem when mine loses oomph, a hose popped off or split.
--paulr

 

[CarrolltonTXPool]

Yep, one of the hoses was off inside. But putting the wheel back on i broke off the plastic screw inside the wheel post. So off to the pool store to get a new one today.