jandy aqualink wiring...dog chewed wires to inside controlle

4x4tx

Well-known member
Jul 23, 2007
401
Greater Houston
Pool Size
17500
Surface
Plaster
Chlorine
Salt Water Generator
SWG Type
Pentair Intellichlor IC-40
Where can I get a piece of replacement wiring for my aqualink..its one of those wires that had three wires inside...white, red, green i think..maybe a black also?

my Dang lab got out today and chewed the wire first thing.... :x
 
What gauge are the wires inside? Home Depot sells cat-3 cable which is 4 single strand copper, usually used for your phone. They may have other stuff as well, but you could always run 3 separate wires if needed. I'd just make sure they are the same or better gauge.
I'd use one of the crimp connector where the silicone squirts out, like this:
http://www.alliedelec.com/Search/Produc ... 00364C617F
If you are a neat freak, then solder and use heat shrink around each wire, then heat shrink them all together. Just make sure to splice them at different lengths.
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.