Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 3 of 3

Thread: Ground washed out by pump and filter

  1. Back To Top    #1

    Ground washed out by pump and filter

    Had Beaded liner replaced last year by local pool store on my 30' round agp. They neglected to fix the spot by the filter where some of the sand/ground has washed out. So I have about a 5 foot area along wall where there is a significant dip of several inches. Not only does it look funny but I'm paranoid the liner will eventually rip off the wall. What would be the best route to fix this?
    In ground vinyl 18x36, 26,700 gal. HP EC-65 DE filter.

  2. Back To Top    #2
    Mod Squad Bama Rambler's Avatar
    Join Date
    Jun 2009
    SouthWest Alabama

    Re: Ground washed out by pump and filter

    Not much you can do about it now except drain and fix it. There is some danger in that but it's most likely the only choice. Some of the construction experts may have some advice so we'll wait for them to chime in.
    Dave J. TFP Moderator
    24' x 52" Round AGP. 2hp/¼hp SPL Power-Flo 2-speed pump. 200sqft Waterway Cartridge Filter. 45MHP2(3GPD) Stenner Peristaltic Pump
    Pool School ----- Pool Math ----- TF-Test Kit

  3. Back To Top    #3

    Join Date
    May 2007
    South Central NJ

    Re: Ground washed out by pump and filter

    A picture would surely help.

    Owner of - PoolGuyNJ LLC
    Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts