Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: IDEAL Chlorine levels & testing

  1. Back To Top    #1

    IDEAL Chlorine levels & testing

    I need help understanding something.

    The local Pool Supply store tells me the ideal chlorine TC level is 2 to 4 ppm and the FC is also 2 to 4 ppm and the CC is 0.

    My 'Aqua Check' test strips say 1 to 5 ppm FC.

    The Pool Calculator says 7 to 12.

    My Taylor test kit only lets me test FC and CC (No TC)

    So I'm a little confused. First, Why is the Pool Calculator 'Goal' so much higher than everyone elses?

    My Taylor test kit gives me the following readings: FC = 9.5 and CC = .5

    I have no idea what's going on with my chlorine. Can someone help me understand? Also, Why doesn't the Taylor kit offer a TC test? And... Is my CC of .5 something to be concerned about?

    Thanks in advance

    TFP SUPPORTER through - My Pool: South Florida, 11K gallons, In ground, concrete / Diamond Brite, Free Form with attached spa (no heater- go figure) Built around 1998, original surface, Jacuzzi Magnum Force 1.5HP pump, Jacuzzi Cartridge Filter, Rainbow 320 Tablet Feeder, Hayward Navigator Pro, Taylor K-2006 w/ TFTestKits replacemeng Reagents.

  2. Back To Top    #2

    Join Date
    Feb 2008
    Flower Mound, TX

    Re: IDEAL Chlorine levels & testing

    Your TC is the sum of your FC and your CC. So you add the two together and that gives your your TC.

    The only way to know what the proper FC is for any pool is to by knowing what the CYA in the pool is. See the Chlorine CYA Chart to note this relationship. Any other ranges given to you by a pool store or other source are completely arbitrary and have no basis in science. CYA level always dictates the FC level.

    Any CC > 0.5 ppm should be addressed by shocking. If it is 0.5 or less than that, nothing special aside from maintaining a proper FC level needs to be done.
    10K gallon IG gunite with waterfall; Pentair CC320P filter; WhisperFlo 2 HP pump
    TF Test Kits - Pool Math - Pool School
    "It depends."- JohnT

  3. Back To Top    #3

    In the Industry
    duraleigh's Avatar
    Join Date
    Apr 2007
    Sebring, Florida

    Re: IDEAL Chlorine levels & testing

    Also, Why doesn't the Taylor kit offer a TC test? And... Is my CC of .5 something to be concerned about?
    If you add FC and CC, the result is TC. The .5ppm CC is well within acceptable limits.

    Pool stores and test strips are what causes most folks to get into problems with their pools. Whats taught on this forum is a superior, more accurate way of managing your pool. Believe you're own testing (it's the best).
    Dave S. - Forum owner
    42k vinyl and concrete pool, 1.5hp pump, 140gpm filter
    TFTestkits , PoolMath , Pool School

  4. Back To Top    #4

    Re: IDEAL Chlorine levels & testing

    The pool store is correct assuming your CYA is 30, but in the real world of pools managed by pool store advice, a CYA of 30 is pretty rare.

    The test strips tell you that "Ideal" CYA is 30-50, and in that range we say your FC ought to be be 2 - 6. But the test strips then tell you that CYA is not "High" until it is in the 150-300 range. And this implies that at any CYA up to 150 you are fine with FC of 2 - 6.

    They both ignore the effect of higher CYA on what portion of the FC is truly ACTIVE and what portion is held IN RESERVE by the CYA.

    Strips would be much too complicated were this relationship acknowledged, and the lack of precision from the wide value ranges indicated would become apparent to all strip users. For the pool owner who wants it all to be easy, one step, testing this would be a problem.
    23,000 gallon in ground pool with rock waterfall and spillover spa, Aqualink control system, Polaris 380 cleaner, Purex Triton Clean&Clear Plus cartridge filter. Located in The Woodlands, Texas.

    Pool owner since Nov 2008, Trouble Free since April 2009. Happy to help when I can.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts