Need Goldline-Auqatrol help

[pooldoog]

Been using Aqua-trol salt for about 2-3 yrs on my above ground pool with BBB..
current Taylor settings..
FC-6
CC-0
PH-7.4
TA-100
CYA-75
borate-50
salt-3,150
Temp-59
current condition of pool -clear and blue :-D
box seems to be working fine..

problem......
my aqua trol control box has started flashing 2 lights---salt-low,,,check cell....

salt level is fine..cell IS clean..
it did this before and i asked and some one told me how to fix or reset it,,but ,,,but,i forgot...
have pushed and held the diagnostic button,,and have unplugged and replugged box....any HELP..THANKS

 

[flintstone]

Try pressing the + button during the "inspect cell" display while cycling through the rotating Default menu to reset it. You may have to hold it a bit.

 

[PhotoEd]

Does anyone know if Goldline has a "Check Cell" warning that automatically pops up every 6 months, or something similar?

 

[tphaggerty]

Does anyone know if Goldline has a "Check Cell" warning that automatically pops up every 6 months, or something similar?

Yes it does. Just press and hold down the little black button until the flashing lights go off. If they stay off, then you are fine. I have had the Goldline unit for about 5 years and had to do this numerous times (about every 2 or 3 months).

 

[PhotoEd]

Was hoping that was the case, thanks!