Long time lurker, first time poster. I'm new to the BBB method so I could use some advice on what to adjust. I've got a 13,500 gallon pebble pool with a SWG. As of this evening my numbers are:
FC: 3.5
CC: 0
pH: 7.5
TA: 80
CH: 270
CYA: 50
Temp: 70
Salt: 3450
Borates: 50
This gives me a CSI of -0.5 per the pool calculater.
My plan was to bring pH up to 7.6, CH up to 300, and CYA up to 70. This will still result in a CSI of -0.42. Beyond this, what should I adjust to bring CSI closer to 0? I've played around with the numbers in the calculator and it appears the only way to get CSI below -0.30 is to take at least one of the other parameters out of the recommended range.
Thanks!
FC: 3.5
CC: 0
pH: 7.5
TA: 80
CH: 270
CYA: 50
Temp: 70
Salt: 3450
Borates: 50
This gives me a CSI of -0.5 per the pool calculater.
My plan was to bring pH up to 7.6, CH up to 300, and CYA up to 70. This will still result in a CSI of -0.42. Beyond this, what should I adjust to bring CSI closer to 0? I've played around with the numbers in the calculator and it appears the only way to get CSI below -0.30 is to take at least one of the other parameters out of the recommended range.
Thanks!