Haven't posted since September; thanks to reading this forum, everything has been "troublefree"
A week ago, NO lights on the replacement NIB Pentair IC20 that I bought off eBay 7 months ago. Yes, yes, Caveat Emptor and all that, but it was only $330 and funds were/are tight. Any tips on how I can troubleshoot this? I took the cover off the Power Center and nothing looks smoked or fried, I see a single green light in the Power Center, but I haven't yet found a way to verify power is actually getting to the CELL
SN 029841 v1.6 (maybe I get lucky and this was a bad version or serial number range that Pentair will gleefully acknowledge?)
I've upped the chlorine levels manually until this gets taken care of, but if anyone has any experience or can help me troubleshoot, I'd be much obliged.
I thought the IC20 was supposed to be a good unit? If I DO have to replace it, I'll stay out of eBay and get a warranty. Maybe I should spend the extra $$ and get an IC40 as was suggested in another thread?
Thanks again,
Stewart
A week ago, NO lights on the replacement NIB Pentair IC20 that I bought off eBay 7 months ago. Yes, yes, Caveat Emptor and all that, but it was only $330 and funds were/are tight. Any tips on how I can troubleshoot this? I took the cover off the Power Center and nothing looks smoked or fried, I see a single green light in the Power Center, but I haven't yet found a way to verify power is actually getting to the CELL
SN 029841 v1.6 (maybe I get lucky and this was a bad version or serial number range that Pentair will gleefully acknowledge?)
I've upped the chlorine levels manually until this gets taken care of, but if anyone has any experience or can help me troubleshoot, I'd be much obliged.
I thought the IC20 was supposed to be a good unit? If I DO have to replace it, I'll stay out of eBay and get a warranty. Maybe I should spend the extra $$ and get an IC40 as was suggested in another thread?
Thanks again,
Stewart