OK, I broke down today and took a sample to the NuWay pool supply place.
FC 2.1ppm
TC 3.1ppm
CC 1.0ppm
pH 7.4
Hardness 50ppm
Alky 100ppm
CYA 10ppm
Copper 0.1ppm
Iron 0.0ppm
TDS NA
So I need to add about two gallons of bleach, hardness is low but was told don't worry about it, cya low but I have some stabilizer to add.
I bought floc to get the solids out. I have the water clean but it just won't clear up. The massive algea bloom I had must have left a lot of dead algea suspended in the water.
I wish I could have gotten a total dissolved solids reading.
FC 2.1ppm
TC 3.1ppm
CC 1.0ppm
pH 7.4
Hardness 50ppm
Alky 100ppm
CYA 10ppm
Copper 0.1ppm
Iron 0.0ppm
TDS NA
So I need to add about two gallons of bleach, hardness is low but was told don't worry about it, cya low but I have some stabilizer to add.
I bought floc to get the solids out. I have the water clean but it just won't clear up. The massive algea bloom I had must have left a lot of dead algea suspended in the water.
I wish I could have gotten a total dissolved solids reading.