Jacuzzi sand filter - need help with 7 way valve

[arz]

Bought a house with an older above ground pool that I've pretty much rehabed.

Only thing left to do is figure out which setting on the filter does what.

If anyone has a Jacuzzi sand filter with a 7 way diverter on top, I could use some help figuring out which setting does what. It would be easier if the sticker with the settings hadn't been torn off.

edit: it's a SplashPak SS-160


If you have one of these, would you please list the settings in order either clockwise or counter-clockwise, I think I can get it working. I can tell where the "whirlpool" setting is and I think I can make out the word "rinse" on one part.

thanks all.



and as this is my first pool, I'll be doing a lot of reading.

 

[spishex]

I think your positions are the same as the Vari-Flo:

12:00 Filter
2:00 Waste
4:00 Closed
6:00 Backwash
8:00 Recirculate
10:00 Rinse

The seventh "position" is just an in-between position that's labeled "winterize" which just holds all ports open.

 

[arz]

that seemed to do the trick - thanks!!


now to let it run for a little bit so I can figure out that chlorine generator thingy