Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: Uploading pics of build "help"

  1. Back To Top    #1

    Join Date
    May 2009
    So Cal

    Uploading pics of build "help"

    I will start off with I am a novice computer guy. I really would like to share my build photos with TFP but I just can't figure out how to get started. Also I did read “How to attach images" in the FAC area and still can't figure it out. I have all my photos on my computer; any help in computer for idiot terms would be greatly appreciated.
    15 X 28, 12,000 Gallon, (IG) Freeform Dark Gray Plaster/Gunite with attached 10 X 7 Spa raised 18", 7 Jet with Spillover and Art Rock Waterfall/Grotto, Pentair Intelliflo VS-3050 for Pool, 2 HP Whisperflo for Waterfall/Grotto, Pentair Clean & Clear Cartridge 320, Pentair 400K BTU Matstertemp, Pentair EasyTouch 4P, Pentair Suction Side PoolShark Cleaner, Stenner pump, autofill system, Plumbed for future Solar, TF-Testkit.

  2. Back To Top    #2
    frustratedpoolmom's Avatar
    Join Date
    May 2007
    SWSuburban Chicago, IL

    Re: Uploading pics of build "help"

    The easiest way IMHO is to use a photo hosting site like, which is free. Upload the photos to that site, selecting the "Large" size when uploading. Then you just copy the IMG code that is listed below the pic, and past the code into your post here, voila image shows.

    Otherwise you have to spend much time resizing the jpeg files and even then the pics usually end up too large for viewing and make navigating the thread difficult.
    Helpful links: Pool School; CYA/Chlorine Chart
    24' round AG pool, 52" high, Raypak heater; Waterway 2 spd Pump;
    150 Sq ft. Clearwater Cartridge Filter; Former and DISSATISFIED "Pool Frog" owner
    Perfectly Clear Pool Service, Find me on Facebook!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts