Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 4 of 4

Thread: Replacing top side control panel. Need help

  1. Back To Top    #1

    Join Date
    May 2016
    Location
    Orlando
    Posts
    11

    Replacing top side control panel. Need help

    The panel on my spa is going bad. Water has gotten in it and half the buttons no longer work. While im waiting for the parts department at the place it was purchased to call me back i thought i would come here. As in all things I would like to fix this myself. It seems like a simple plug and play. Finding an affordable part is what im here for. behind the old panel is all spray foam. In negative space under the spa is filled with spray foam. But the limiting factor is the side the panel is on is up against a wall. I dont want to have to drain and move the tub (which it can only slide about 10 inches) but i might eventually.
    Its a coast spa elite cascade V series. Im hoping i can unplug the connector from the back side of the control panel its self. Instead of inside the side of the hot tub. Any suggestions?
    IMAG0006.jpgIMAG0003.jpg

    Here i have found a panel with all the same buttons and some of the manuals i have say balboa.

  2. Back To Top    #2

    In the Industry

    Join Date
    Oct 2015
    Location
    Phoenix
    Posts
    15

    Replacing top side control panel. Need help

    No you have to unscrew Control board housing to access the board and unplug. Just no way around it.


    Sent from my iPhone using Tapatalk

  3. Back To Top    #3

    In the Industry

    Join Date
    Oct 2015
    Location
    Phoenix
    Posts
    15

    Replacing top side control panel. Need help

    I would move it and turn it that way have access to pumps and board later on.


    Sent from my iPhone using Tapatalk

  4. Back To Top    #4

    Join Date
    May 2016
    Location
    Orlando
    Posts
    11

    Re: Replacing top side control panel. Need help

    Quote Originally Posted by IntegrityPoolCare View Post
    No you have to unscrew panel the Control panel and unplug. Just no way around it.

    Do you mean unscrew the side panel on the outside of the hot tub? If it were the exact same controller why couldn't I pop off the cable from the back Of the controller (as seen in the picture).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •