I have a Hayward aqua rite system with a new T-3 cell that was replaced under warranty about 2 months ago . I've been noticing the lçd display is acting weird lately ,if I touch any of the buttons on the display the lçd starts to flicker and the numbers get distorted.
Im also having an issue with the cell setting changing by itself, I set it to T-3 and a few days later I see the salt levels are all wrong and look and sure enough the setting is on a higher cell setting then I previously set.
Could this be a bad mother board ?
Any help would be appreciated.
Im also having an issue with the cell setting changing by itself, I set it to T-3 and a few days later I see the salt levels are all wrong and look and sure enough the setting is on a higher cell setting then I previously set.
Could this be a bad mother board ?
Any help would be appreciated.