Hi,
I have a Nature2 Fusion Soft. I noticed the other day that I was very low on chlorine.....about .6 ppm. I jacked up the SWG to 100%. I tested today and I have 0 ppm chlorine. I then noticed today I have "No Flow" showing on the display......which I learned chlorine production stops.
I pulled the Flow/temp/salinity sensor and it had no scale, but I did scrub it down as directed anyway. I also took a look at the cell and it looks mostly (97% +) clean.
I cycled the power off and on and I still get "No Flow".
Any ideas? This is the third season for the SWG....brand new pool 3 years ago.
Thanks,
Doug
I have a Nature2 Fusion Soft. I noticed the other day that I was very low on chlorine.....about .6 ppm. I jacked up the SWG to 100%. I tested today and I have 0 ppm chlorine. I then noticed today I have "No Flow" showing on the display......which I learned chlorine production stops.
I pulled the Flow/temp/salinity sensor and it had no scale, but I did scrub it down as directed anyway. I also took a look at the cell and it looks mostly (97% +) clean.
I cycled the power off and on and I still get "No Flow".
Any ideas? This is the third season for the SWG....brand new pool 3 years ago.
Thanks,
Doug