Wondering if anyone has a comprehensive list of the self-test/diagnostic fail codes for an EasyTouch. I got a 146 a few days ago, when my IntelliChlor IC40 stopped communicating w/ my EasyTouch (noticed the output LED's on the IC40 don't blink when I set IntelliChlor output to something other than multiples of 20). Called Pentair, they assigned the problem to a very reputable local builder and I'm confident the problem will get fixed, but I'm curious about the universe of fail codes.
FYI, while the warranty for Pentair equipment is normally 1 year, I learned that the warranty is extended to 3 years if 3 or more Pentair equipment components were purchased/installed at the same time. All of my equipment is Pentair (pump, filter, heater, vacuum and control board) so I was pretty happy to hear that from the Pentair rep.
Thanks!
FYI, while the warranty for Pentair equipment is normally 1 year, I learned that the warranty is extended to 3 years if 3 or more Pentair equipment components were purchased/installed at the same time. All of my equipment is Pentair (pump, filter, heater, vacuum and control board) so I was pretty happy to hear that from the Pentair rep.
Thanks!