Become a TFP Supporter Pool Math Forum Rules Pool School
Results 1 to 2 of 2

Thread: seeping water question

  1. Back To Top    #1

    Join Date
    Feb 2016
    Carrollton texas

    seeping water question

    I sent these pictures to my PB this morning, but figured I would check with everyone here too.

    We have had some rain the past few days leading up to plastering yesterday. late yesterday I noticed standing water in the spa, I mopped it out and this morning there was another small puddle. How would they go about correcting this? My thoughts are if water can seep in, it can seep out when full.

    [IMG]screengrab[/IMG][IMG]upload a gif[/IMG]
    32x15 gunite 15.5k gal
    Jandy 2.7 E-pump, 400k heater, Dev 60 DE filter, Nature2 chlorinator

  2. Back To Top    #2
    mas985's Avatar
    Join Date
    May 2007
    Pleasanton, CA

    Re: seeping water question

    Are you sure there isn't a hydro-static valve in the drains? It would let water in but not out.

    Also, what are the drains connected to right now?
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts