Aqua Trol model AQ-TROL-RJ - current salt level is 3000ppm
Power, Generating, & Super Chlorinate lights all come on like normal after the No Flow light stops flashing, but very shortly after they all go out.
Diagnostics buttons pushed when lights are ON read:
1) Pool temp 88
2) cell voltage starts at 17.0 and quickly drops to 1.1 (then all lights go off)
3) cell current 0
4) Desired output 100p
5) Instant salinity - 0
6) Product name AL-7
7) Software revision level R1.45
Diagnostics buttons pushed when lights are OFF read:
1) Pool temp 88
2) cell voltage starts at 1.1 and very very slowly rises to 17.0 (then all lights come on)
3) cell current 0
4) Desired output 70p
5) Instant salinity - 0
6) Product name AL-7
7) Software revision level R1.45
Any suggestions as to what is going wrong with this unit will be greatly appreciated!
Power, Generating, & Super Chlorinate lights all come on like normal after the No Flow light stops flashing, but very shortly after they all go out.
Diagnostics buttons pushed when lights are ON read:
1) Pool temp 88
2) cell voltage starts at 17.0 and quickly drops to 1.1 (then all lights go off)
3) cell current 0
4) Desired output 100p
5) Instant salinity - 0
6) Product name AL-7
7) Software revision level R1.45
Diagnostics buttons pushed when lights are OFF read:
1) Pool temp 88
2) cell voltage starts at 1.1 and very very slowly rises to 17.0 (then all lights come on)
3) cell current 0
4) Desired output 70p
5) Instant salinity - 0
6) Product name AL-7
7) Software revision level R1.45
Any suggestions as to what is going wrong with this unit will be greatly appreciated!