Notsure if I’m posting this in the correct location but here goes. As noted in mypost about what pool cleaner you use, I will be changing my liner in the nearfuture. With that said, I would like to install a dedicated pool cleaner linein the event I end up not purchasing a robotic pool cleaner. When I built mypool in 2004, I had the foresight to add a wall fitting on the back wall of mydeep end for the future addition of a fiber optic light. Fast forward 12 years…stillno light. I have been kicking myself ever since for not adding the dedicatedcleaner line on the side wall at that time. Does anyone know of an easyinstallation process for the cleaning line wall fitting? I am really notenthused about digging a giant hole beneath my pool deck to get in there toinstall the wall fitting nut behind my polymer wall. Is there some retro-fitwall fitting that I can epoxy and just screw to the wall with counter sunkscrews? Is there an over-the-deck solution that isn’t horrible looking or iseasily removed when not in use? Is it possible to use the fitting on the backwall? Any help, ideas, opinions welcomed.