aving issues with continuously high PH, practically swimming in 1-2 gallons/week! Struggling to get below get below 7.8 and keep it maintained. Read a few threads from here and seem to have a better grasp at least but still want to check. Water clear as can be. Water temp 90 as of today. Fresh test results from this afternoon:
FC- 3.26
TC- 3.47
CC- .21
pH- 8.0
Hardness- 135
TA- 82
CA- 52
Borate- 35
Salt- 3370
Thoughts are to raise borate to 45ish with 10 lbs Endure, lower pH to 7.8 with gallon of MA, raise CA to 100ish
Correct order? Proper amounts?
Is there a "proper" amount of run time for SWG to eliminate the out-gassing I think they called it? Better to run 3-4 short times? or like now 2 times/day, 5 hours each (6am-11, 2-7)?
Is there a way to run pump for filtration and not run SWG?
FC- 3.26
TC- 3.47
CC- .21
pH- 8.0
Hardness- 135
TA- 82
CA- 52
Borate- 35
Salt- 3370
Thoughts are to raise borate to 45ish with 10 lbs Endure, lower pH to 7.8 with gallon of MA, raise CA to 100ish
Correct order? Proper amounts?
Is there a "proper" amount of run time for SWG to eliminate the out-gassing I think they called it? Better to run 3-4 short times? or like now 2 times/day, 5 hours each (6am-11, 2-7)?
Is there a way to run pump for filtration and not run SWG?
